Genuine Honda Oem

2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V
2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V   2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

Our lift kits are designed to work with your factory Honda suspension to achieve approximately 2 inches (51mm) of lift. Complete kit includes: set of 4 spacers (2 front and 2 rear), adjustable control arms for the rear and offset camber adjustment bolts for the front, hardware and detailed illustrated installation instructions.

This kit utilizes a larger spacer for the front so the vehicle sits level and not rear-high (please read our FAQ). Installing these spacers do not require the disassembly of the strut. Color of camber bolts may vary from photo.

Our kits are powder coated for a durable, attractive finish and use zinc plated grade 10.9 hardware. Want an even bigger lift? For off road use only! Stock 205/70/15 (26.3") Stock 215/65/16 (26.4") +1.5 215/70/16 (27.8") +2.5 235/70/16 (28.9") +3 225/75/16 (29.2") +3.5 235/75/16 (29.8") +4 255/70/16 (30.0). Q: Why are the front spacers taller than the rear spacers?

A: The suspension geometry is different in front than in rear. In order to get an equal amount of lift front and back, different size spacers have to be used. Q: Will I need an alignment after installing this kit? A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1.5 inches.

Q: What are the extra bolts for? A: The 2 cam bolts included in this kit are used to adjust the camber on the front suspension, which is necessary after installing a lift kit. Q: Will lifting my car affect the axles? It depends on the amount of lift and the type of axles you have in your vehicle.

Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers greater than 2 inches will require a subframe kit (drop) or "body lift" to maintain proper axle angle. If you have worn out axles, Insane Shafts axles are an excellent upgrade and will eliminate axle vibration.

Please check their website for more information. Q: Do I need to replace my suspension bushings when installing a lift kit?

A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely. A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Suspension lift kits are intended for off-road use where suspension travel and ground clearance are more important. The item "2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V" is in sale since Monday, April 15, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina. This item can be shipped to United States, Canada.
  • Type: Spacer
  • Country/Region of Manufacture: United States
  • Lift Height: 2 inches Front & Rear
  • Manufacturer Part Number: HRG-CRV0206LK3.1
  • Part Type: Suspension Lift Kit
  • Included Hardware: Mounting Hardware
  • Placement on Vehicle: Front
  • Brand: HRG Engineering
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V   2 inch (51mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V