3 inch (76mm) Ultimate Lift Kit for 4WD 2002-2006 Honda CR-V HRG Engineering

  
Designed to prevent axle or suspension binding issues and premature bushing wear, while providing stock ride quality. This no-compromises kit includes everything you'll need to lift your second gen CR-V the right way! Complete kit includes: set of 4 spacers (2 front and 2 rear), adjustable control arms for the rear, offset camber adjustment bolts for the front, body spacers (subframe kit), extended bolts and detailed illustrated installation instructions.

This kit is designed for a level ride height. Please see other listings for Element kits. For a durable, attractive finish and use grade 10.9 hardware. Kit comes with free stickers! Actual spacer height is 2.5 inches (64mm) front and 1.5 inches (38mm) rear.

3 inch (76mm) lift is based on before and after measurements taken at the fender. Results may vary depending on condition of existing suspension. For off road use only! Stock 205/70/15 (26.3") Stock 215/65/16 (26.4") +1.5 215/70/16 (27.8") +2.5 235/70/16 (28.9") +3 225/75/16 (29.2") +3.5 235/75/16 (29.8") +4 255/70/16 (30.0).

Q: Why are the front spacers taller than the rear spacers? A: The suspension geometry is different in front than in rear. In order to get an equal amount of lift front and back, different size spacers have to be used. Q: Will I need an alignment after installing this kit? A: Yes, just as if you lowered your car, lifting changes the wheel alignment.

It is also recommended to install camber correction kits for lifts greater than 1. Q: What are the extra bolts for?

A: The 2 cam bolts included in this kit are used to adjust the camber on the front suspension, which is necessary after installing a lift kit. Q: Will lifting my car affect the axles? It depends on the amount of lift and the type of axles you have in your vehicle.

Some rebuilt axles are more prone to having issues. In general, installing lift spacers greater than 1.75" will require a subframe drop or "body lift to maintain proper axle angle (included in this kit). Q: Do I need to replace my suspension bushings when installing a lift kit? A: It depends on the condition of your existing bushings.

We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up.

The item "3 inch (76mm) Ultimate Lift Kit for 4WD 2002-2006 Honda CR-V HRG Engineering" is in sale since Saturday, August 10, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Lift Height: 2.75 inches Front & 3.0 inches Rear
• Manufacturer Part Number: HRG-CRV0206ULK-3
• Part Type: Suspension Lift Kit
• Included Hardware: Mounting Hardware
• Type: Spacer
• Placement on Vehicle: Front
• Brand: HRG Engineering
• Fitment Type: Performance/Custom
• Warranty: Lifetime