A: You can fit a 215/75/15 with minor adjustment to the pinch weld in the back of the front fender. You can fit 235/75/15 tire with some trimming of the plastic.
A 30+" tire will require a 4" lift or significant trimming to fit. We also recommend wheels with lower offset (backspacing) or wheel spacers to add clearance for the larger tires. Q: Will I need an alignment after installing this kit? A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1 inch.
Q: Will lifting my car affect the axles? It depends on the amount of lift and the type of axles you have in your vehicle. Worn original or parts store rebuilt axles are more prone to having issues. This kit is designed to solve the axle issues common to lifting the 97-01 CRV.
However, lift heights can vary depending on the condition of the existing suspension and therefore we cannot guarantee there will be no axle issues. For best results, install new axles and do not combine this kit with lift springs or other spacers. Q: Do I need to replace my suspension bushings when installing a lift kit? A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed.The added benefit of installing urethane bushings is that it allows the suspension to move more freely. We also recommend replacing sway bar end links on 97-01 CRV after 100k as they tend to rattle when going over bumps. A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. The item "2 inch (51mm) Lift Kit for 1997-2001 Honda CR-V" is in sale since Saturday, March 9, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina. This item can be shipped to United States, Canada.