94-95 OEM USDM Honda Accord sedan coupe rear bumper lip Prelude BB1 BB2 BB4 NPV

  
This listing is for a used, but Genuine / OEM complete 3 piece rear bumper lip removed from a 1994 - 1995 Accord. SATISFACTION GUARANTEED OR SEND IT BACK. WE KNOW THERE MIGHT BE CHEAPER KITS OUT THERE, BUT WHY TAKE A CHANCE!!! Please read piece details to avoid any misunderstandings! This lip is NOT a direct fit for the 92-96 Prelude and WILL need to be modified to work. This lip kit is specifically designed for a 1994 or 1995 Honda Accord Sedan or Coupe.

The listing for this kit includes all 13 OEM mounting bolts!!!!!! Lip comes with all the OEM mounting bolts.

Lip comes in 3 pieces as pictured. None of the pieces have been modified in any way. Again, this is the OEM Honda Rear lip, not aftermarket. The outer pieces are stamped with HONDA lettering on the inside of each piece.

These lips kits are getting rarer by the day!!!!!! These lips are NOT the same as those found on the Accord Wagon 94-97 or the ones on the 96-97 Accords.

They were only available for these 2 models years and only on the Sedans and Coupes. Take advantage now while we still have them available. These are getting harder and harder to source in good condition. Great replacement parts if yours are missing or damaged.

As they become harder to get, the price will surely increase before you know it, so take advantage now!!! Specific lip kit tied to this listing: Clean with minimal wear/scuffing. All the pieces are OEM. No damage to any of the mounting points on any of the three pieces.

All pieces have normal wear on them, road marks, some may have slight scuffs on the face or underside or. Overspray paint that can be sanded out, no problem. All the mounting holes are usable as designed, not cracked or missing. Remember that the sun beats on these pieces and after time plastic could become discolored or faded.

These pieces are used and about 20+ years old. Usually the scuffing tends to be on the bottom side of the lips facing the road, not the faces visible when installed, but not always. Center ruler piece might have slight damage near one of the ends, but if its for a conversion, its going to be cut anyways.

This item is rated a 7 out of 10, only due to any minor scuffs and/or finish. At the very least, they will require a good cleaning. Only the amount of outer scuffs differs from piece to piece. There are no other differences. If you have any issues with any of this, please look at other sellers listings.

If you need near perfect pieces with no markings, we recommend you look for brand new pieces. If your going to get it painted anyways to match your car, the pieces will need to be sanded and prepped anyways. Please remember that the picture shows a sample of the exact pieces you will receive, not the specific ones tied to this listing. On that note, they are becoming more and more rare to find complete. 2 SET(S) ARRIVED TODAY, SO GET IT NOW WHILE YOU CAN!! WE HAVE BEEN RUNNING OUT OF STOCK REGULARLY FOR OVER A MONTH. Stock levels change every week, so keep checking with us. Because these lips are for sale locally, we reserve the right to end the listing at any time for any reason. Please consult online sources for any details on the conversion steps. Do NOT send us questions about the conversion as we dont have any info to give. Or you can always Google " Prelude rear lip conversion Accord " for other sites. This is a must for all Prelude BB1 BB2 BB4 owners as the stock Prelude rear bumper looks naked and needs a lip to give it a lowered stance. Use OEM Honda parts, not cheap aftermaket stuff.

We included 2 additional pictures. One of a BB Prelude with the painted Accord lip installed and one with the stock 94 Accord pic in case you are replacing on the same model. Check out our other listings. What you see is what you get, no games.

These lips are in short supply. We are not guaranteed to have more, so take advantage while we still have some. Please read About Me (me) next to our User ID for terms and conditions. The item "94-95 OEM USDM Honda Accord sedan coupe rear bumper lip Prelude BB1 BB2 BB4 NPV" is in sale since Thursday, July 26, 2018. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Spoilers & Wings".

iwerks" and is located in Fontana, California. This item can be shipped to North, South, or Latin America, all countries in Europe.

• Manufacturer Part Number: 71507-SV4-000
• Primary Color: Black
• Brand: Honda
• Surface Finish: unpainted OEM plastic
• Other Part Number: 71502-SV4-000
• Warranty: Yes
• Country/Region of Manufacture: Unknown
• Placement on Vehicle: Left
• OE Spec or Performance/Custom: OE Spec